NUCON® Model AGT Aerosol Generator

Model AGT™ Aerosol Generator, front view

The NUCON Model AGT™ is a high-output portable thermal aerosol (DOP or PAO) generator. It can provide up to 241 mL/min of submicron PAO, or 121 mL/min of submicron DOP, aerosol.

System pressure indicator and all operational controls are on the front panel.

Liquid to gas phase conversion takes place in a continuous stainless steel coil cast in an aluminum block. Heater cartridges and thermal switches are inserted in the block, ensuring maximum thermal conductivity and mass with maximum safety.

All operations are front panel controlled.
Rugged design for field use.
Filling is very easy with quick-connect funnel (no tools required).
Auto Shutdown failsafe for three modes - electronics overheat, block overheat, or aerosol overheat.
Leak-tight, long life and safe aerosol generation.

The NUCON Model AGT is unique in its ability to produce large volumes of submicron aerosol in a compact, portable instrument. All critical parameters (temperature, pressure and flow) are precisely controlled for consistent, repeatable performance.

Temperature is controlled by state of the art temperature switches. Flow is set using a built-in liquid flowmeter. A separate ON/OFF switch starts and stops liquid flow to the heater block without changing flow rate settings.

Model AGT™ Technical Specifications

Output	Aerosol Size	Size
PAO: maximum output up to 241 mL/minute of submicron aerosol. Constant operation at 221 mL/minute. DOP: maximum output up to 121 mL/minute of submicron aerosol. Constant operation at 102 mL/minute.	99+% < 3.0 micrometer 50+% < 0.7 micrometer 10+% < 0.4 micrometer Reservoir Capacity ~ 1 quart (~I L)	18.75” x 9.32” x 10.06” (477 mm x 237 mm x 265 mm) Weight 35 lbs (16 kgs)
Power Requirements	Compressed Air or Nitrogen
120 (± 10) VAC 19 Amps (heaters on) 2280 Watts	Minimum: 80 psi (550 kPa Maximum: 190 psi (1310 kPa)