F-1000-SN-10 Slit Nozzle Aerosol Generator

NUCON			NUCON International, Inc. 7000 Huntley Road Columbus, OH 43229-1035 U.S.A. Telephone: 614-846-5710 Fax: 614-431-0858 E-mail sales@nucon-int.com

F-1000^TMSeries Test Instruments

NUCON Model SN-10 Aerosol Generator

The NUCON Model SN-10 produces a uniform particle size distribution aerosol and can be used with a variety of challenge agents. Volumetric output is linear and particle size distribution is constant over a 10-100 psig input pressure range. The SN-10 is the perfect upgrade of the "Laskin Nozzle" aerosol generator.

Testing Applications

Nuclear Air and Gas Treatment Systems
HEPA Filter Systems
Biohazard Cabinetry
Protective Mask Fit Testing
Clean Rooms
Lab Hoods/Exhausts
Asbestos Clean Up

Precise, continuous output control reproducibly generates the required aerosol particle size distribution for HEPA filter testing.
Capable of generating aerosol from any of the currently used liquids (Polyalphaolefin (PAO), Dioctylphthalate, Dioctylsebacate, Corn Oil, Mineral Oil, Glycol
The particle size distribution meets the requirements of ASME N510.
The generator can be sterilized for medical applications.
Integral strainer to prevent contamination of the nozzle.
Integral pressure relief valve.
Integral pressure regulator for output control.
Available in various capacities.

	Air Pressure vs DOP Output

Disassembled Generators and Carrying Case

Technical Specifications and Information:

Size: 15" x 8" (38 cm x 20 cm)
Weight: 9 lb. (4 Kg empty)
Output: Up to 4 g/min of aerosol (More than the output of 12 standard Laskin Nozzles)
Output Control: Integral pressure regulator
Reservoir: 0.53 gallons (2 liters)
Utility Requirement: Maximum 20 SCFM (550 lpm) Compressed gas (air) at 100 psig (700 kPa)

Aerosol size:

99% less than 2.0 micro meter
97% less than 1.0 micro meter
90% less than 0.7 micro meter
75% less than 0.5 micro meter

The "SN" is also available in a smaller size (SN-5). Aerosol size distribution is identical to the SN-10

Technical Specifications and Information:

Size: 5" x 10"
Weight: 4 lb. (empty)
Output Control: Integral pressure regulator
Reservoir: 6 Oz. (180 ml.)
Utility Requirement: 1-10 SCFM at 5-50 psi compressed air

	NUCON F-1000™ Series Test Instruments
	Model F Aerosol Generator (Thermal) Model F Halide Generator Model SN-10 Aerosol Generator (Pneumatic)	Model F Aerosol Detector Model SAE Halide Detector Model PD-C Pressure Detector Model HGP-H Pulse Mode Halide Generator

[Home Page], [Activated Carbon], [Filter System Testing Services], [Testing Instruments] [Nuclear Power Plant Services], [Laboratory Testing Services], [DOE & Defense Facility services], [Solvent Vapor Recovery Systems], [Company Profile & Experience], [Site Map], [Employment]

NUCON International Inc. All Rights Reserved